價格:免費
更新日期:2016-03-10
檔案大小:1.3 MB
目前版本:1.4.0
版本需求:需要 iOS 8.0 或以上版本。與 iPhone、iPad 及 iPod touch 相容。
支援語言:英語
J-UV is an UV index meter that plugs into audio jack of your iPhone/iPad.
Features:
-Plug and Play! No setup required
-Measurement range from UVI 0 to 11+
-Real-time UV Index measurement
-UV protection for reference
-No battery required
How to use:
1. Open "J-UV" app.
2. Firmly plug the J-UV into the audio jack of iPhone/iPad and turn the headphone volume to maximum.The UV index reading shall be shown in a few seconds.
3. When you finished using J-UV, press "Done", then plug out J-UV from iPhone/iPad.
Troubleshooting:
If the J-UV is not showing the UVI reading, please check the following:
-If the app shows "No J-UV detected" or "No data from J-UV", please manually turn the headphone volume to maximum.
-If the app shows "Cannot access microphone due to privacy setting", then please turn ON the microphone accessibility in privacy setting for "J-UV" app.
-Please make sure "Volume Limit" is turned off in "Settings" of iPhone/iPad.
-For iPhone/iPad purchased in EU, the EU volume limit may apply to devices which means the headphone volume maybe lower, therefore it is not guaranteed that J-UV will work. If there is "EU Volume Limit" in "Settings", please turn it off and try.
Contact us:
If you have any enquiries, please contact
marco@carrin.com.hk
支援平台:iPhone, iPad