價格：免費
更新日期：2020-05-21
檔案大小：14.2 MB
目前版本：1.3.1
版本需求：系統需求：iOS 12.0 或以後版本。相容裝置：iPhone、iPad、iPod touch。
MyVoltControl is designed specifically for the Chevrolet Volt (and related models), and the Chevrolet Bolt. ("Related models" include the Cadillac ELR, Opel Ampera, Holden Volt.)
MyVoltControl requires either:
- an OBDLink MX+ OBD adapter (preferred)
- an OBDLink MX-WiFi OBD adapter
- a generic WiFi OBD adapter may work in some cases.
These adapters plug into the OBD-II port under the left side of your dash. This App does not work with other BlueTooth adapters.
The App itself is free. Use of the functions described below requires an in-app purchase to enable each one that you want to use.
MyVoltControl consolidates four functions, long available for other phones, and makes them available for the iPhone. These are known as:
-->> MyVoltHold
-->> MyVoltLifetime
-->> MyVoltDiag
-->> MyVoltAfterblow
-->> The Volt Hold function does four things.
- First, it reports 4 pieces of information about your car (as shown in the photo above).
- Second, it allows you to turn on a "Hold" mode which approximates the Hold mode built into the car beginning with the 2012 model. This Hold mode turns on the internal combustion engine (ICE) as needed to try to maintain a State of Charge value that is close to the charge that was present when you turned the mode on. So why, you may ask, would I want that function on a newer car. Very simple really. Since Sport mode and Hold mode are mutually exclusive, this function allows you to use the car Mode button to engage Sport mode, while using the Hold function in this App to achieve Hold mode at the same time!
- Next, it allows you to ask the car to run the internal combustion engine. You can use this to get heat from the engine on a cold morning, or to manually simulate your own Hold mode if you prefer.
- Finally, you can also use this function to force the ICE off, which you might want to do if the ICE is running due to low temperature (done for driver comfort).
-->> The Volt Lifetime function allows you to reset the lifetime fuel economy value ("Lifetime MPG" or "Lifetime L/100km") value for your car. You will find this useful if you've purchased a car which has recorded the previous owner's fuel economy results.
-->> The Volt Diag function allows you to run some tests on your high-voltage (traction) battery. This is one of the two functions which apply to the Chevrolet Bolt.
-->> The Volt Afterblow function allows you to control a system that GM added to your car to dry out the A/C vents. This system is OFF by default and the Volt Afterblow function allows you to turn it on (or back off). This is one of the two functions which apply to the Chevrolet Bolt.
- You can use the My Volt Afterblow feature only if you are using either an OBDLink MX+ or an OBDLink MX-Wifi OBD adapter. Further information about this requirement is given in the App Functions information available on the App Menu.
