價格：免費
更新日期：2018-06-09
檔案大小：865k
目前版本：1.26
版本需求：Android 3.0 以上版本
官方網站：mailto:dev@bsc101.eu
* Control the outputs and inputs of your UniPi (EVOK) device, Raspberry with PiFace Digital2 or Pollin AVR-NET-IO easily.
* UniPi (EVOK) support (e.g. UniPi Neuron): analog and digital outputs, relays, analog and digital inputs, sensors of type dev=temp (e.g. 1-wire sensors)
Features:
- Configure multiple profiles (Name, IP, Port)
- Name your outputs and inputs
- Outputs can behave as switch or push button
- Push button mode: define min and max switching times
- Read inputs manually or continously
- Different layouts for tablets und phones
- Phone: swipe left/right to change the view (inputs or outputs)
- Switch device by swiping up or down
- Change background and text colors for each device
- Password protection for all settings
Feedback goes to: dev@bsc101.eu
-----------
Raspberry Pi with PiFace Digital 2 how to:
http://www.bsc101.eu/dronoff/pifaceguide.html
1) Setup Raspberry Pi and PiFace Digital 2 (raspi-config -> enable SPI)
2) Install these python libs:
sudo apt-get install python{,3}-pifacedigitalio
sudo apt-get install python{,3}-pifacecommon
3) Download this python script: http://www.bsc101.eu/dronoff/dronoff3.py
4) Run the script dronoff3.py on the Raspberry: python3 dronoff3.py
5) Add a device in the app, use the IP of your Raspberry and port 50290 (you can change the port in the script), set Board to Raspberry Pi + PiFace Digital 2
If you have any questions, please contact: dev@bsc101.eu
Disclaimer:
The provider of this app is not responsible for any damages caused by using this app!
