價格：免費
更新日期：2016-12-13
檔案大小：3.7M
目前版本：1.1
版本需求：Android 2.3 以上版本
官方網站：http://preflightsim.com/plmain.html
Email：josearcepena@hotmail.com
聯絡地址：PO Box 1985 East Doncaster Vic 3109 Australia
IMPORTANT: THIS FREE VERSION HAS THE FULL FUNCTIONALITY OF THE FULL VERSION BUT IS LIMITED TO 3 MINUTES OF CONNECTION TIME.
PingLocust is an Android-based Control System based on 3G, 4G, or higher Internet Data Systems and is a simple, straightforward, plug-for-plug replacement of conventional RC(Radio Control) systems. It provides instant additional functionality like enhanced range and reliability, digital real-time FPV video, GPS tracking, and telemetry. See below link for more information:
http://www.preflightsim.com/plmain.html
PingLocust has 3 main components:
Controller App (this app) which serves as the RC transmitter
Slave App which serves as the RC receiver
Slave Whitebox which provides the wired interface between the Slave App and the servos (in the case of a ground/water RC vehicle) or low-level flight controller (in the case of a UAV/quadcopter/multicopter)
Features:
Enhanced Range (Maximum theoretical range > 20,000 kilometers or 12,427 miles)
Digital live Video Feed and recording
Up to 12 proportional digital channels
Up to 6 telemetry digital channels (for special versions of Whitebox)
Wireless operation
Enhanced signal reliability
Live GPS data reception and recording
Location and orientation can be displayed on Normal or Satellite Maps
Speech warnings on Controller
Channel Controls customization (exponential, variable rates, etc.)
About Whitebox:
The PingLocust Whitebox is the hardware component of the PingLocust Control system with the following features:
Plug-for-plug replacement of conventional RC receiver
Wireless Bluetooth connection to PingLocust Slave device
Supports up to 12 proportional digital channels
Supports up to 6 telemetry digital channels
See below link for more information:
http://www.preflightsim.com/plwhiteb.html