速報APP / 生產應用 / LogiCO2-Sniffer

LogiCO2-Sniffer

價格:免費

更新日期:2018-05-15

檔案大小:72.8 MB

目前版本:1.1

版本需求:需要 iOS 7.0 或以上版本。與 iPhone、iPad 及 iPod touch 相容。

LogiCO2-Sniffer(圖1)-速報App

The LogiCO2 Sniffer is a product that communicates CO2 measurement values from LogiCO2’s CO2

Safety Systems, to Smartphones.

The LogiCO2 Sniffer is compatible to the Mk7, Mk9 and Mk10 CO2 sensor.

The LogiCO2 Sniffer can be connected to a CO2 Safety System that has a Central Unit or has “stand

alone” CO2 sensors. It is connected through the “red” RJ45 cable that both powers and

communicates with the LogiCO2 Sniffer.

The LogiCO2 Sniffer can monitor CO2 Safety Systems with up to eight sensors.

Install the LogiCO2 Sniffer App. and you are ready to receive the measurements from the Sniffer.

LogiCO2-Sniffer(圖2)-速報App

The LogiCO2 Sniffer is a beacon that broadcasts the measurements to all smartphones within range

of the Bluetooth signal that currently are running the Sniffer-App. You need to scan for sensor signals

from the Sniffer and have the App running. Have the Bluetooth enabled on your smartphone.

The LogiCO2 Sniffer is a one way signal device, in other words the sniffers function can not

compromise the functionality of the LogiCO2 Safety System. You can only read out the

measurements.

The LogiCO2 Sniffer also logs the last two weeks of measured values for added safety. The last two

weeks measurements are stored. Both the CO2 concentration (STEL) and the TWA value (PEL – Time

LogiCO2-Sniffer(圖3)-速報App

Weighted Average) are stored every 15 minutes. To read out the logger in the App. you must have

access to the Sniffer device.

支援平台:iPhone