價格：免費
更新日期：2018-07-17
檔案大小：997k
目前版本：0.2.4
版本需求：Android 4.0 以上版本
官方網站：http://www.sotabeams.co.uk
Email：sotabeamsapp@gmail.com
聯絡地址：隱私權政策
Allows you to adjust settings for a SOTABEAMS WSPRlite.
A WSPRlite is a low power amateur radio transmitter, useful for testing and comparison of antennas - see https://www.sotabeams.co.uk/wsprlite-antenna-tester/ for details. This app is only useful if you have a WSPRlite, and works with both types of WSPRlite (Classic and Flexi).
Your Android device must support USB On-The-Go (OTG), and you will need a USB OTG cable (such as http://www.sotabeams.co.uk/on-the-go-lead-for-wsprlite-to-go/) to connect the Android device to your WSPRlite.
Features:
- Adjust all the same settings as the desktop config program, including callsign, locator, band, and power level
- Automatically calculate the locator based on your current position
- Automatically start the WSPRlite at the correct time (network connection required)
- Open DXplorer.net in a browser to view statistics about where your transmissions have been received
- Update WSPRlite firmware
Note: Using the autostart function and powering a WSPRlite from your Android device is a great option for short periods of operating in the field. But be aware that using a WSPRlite powered from your phone will drain your phone battery faster!
After programming you can still start the WSPRlite manually using the push-button on the device (see http://dxplorer.net/wsprlite/ for instructions). If starting it manually, we recommend using https://time.is/ or similar to check the current time, as the system clock on a phone can be a bit inaccurate.
Permissions used:
- Location: for calculating Maidenhead grid locator based on current position
- Network access: for firmware updates, and checking the current time for autostart
- Write to storage: for caching downloaded firmware updates
- Prevent device from sleeping: for autostart function, to make sure that the start occurs at the correct time and is not delayed by the phone sleeping
See privacy policy for more details.
This app uses the following libraries:
https://github.com/felHR85/UsbSerial - MIT license
https://github.com/alt236/USB-Device-Info---Android/ - Apache 2.0 license