速報APP / 生產應用 / FDEM-8BT

FDEM-8BT

價格:免費

更新日期:2019-10-12

檔案大小:693k

目前版本:2.5.9

版本需求:Android 2.0 以上版本

官方網站:http://elecdev.co.za

Email:barlowdes@gmail.com

聯絡地址:P O Box 525 Faerie Glen 0043 South Africa

FDEM-8BT(圖1)-速報App

This is custom software for use with a FDEM-8BT instrument, meant for a 7 inch Android tablet with a screen resolution of 1024X600, other screen sizes are not currently supported.

Graphic area

This is the main area on the screen where the eight frequencies are shown graphically.

Each frequency is drawn to its own scale. The highest frequency is at the top of the screen and the lowest frequency is at the bottom. Tap and slide finger in this area to display the station number and distance from start of line in General Info area.

Save File

This button is used to save the field data to internal storage on the tablet, a file name must be provided before using this option.

Load File

This button is used to load the field data from internal storage on the tablet, a file name must be provided before using this option.

START Line

To start a new line/file: set up the data logger and coils in the correct configuration, then press START Line. Enter File Name when prompted.

Export Data

FDEM data files can be exported to Surfer or PCFDEM format data file using this option. Surfer files can be viewed on the tablet using 3DSurface app.

Coil Spacing

Before starting a new line, select the coil spacing that will be used, using this option. Tap the area showing a new scroll panel will open in the graphic area

scroll to the value to be used and select using the button on the right.

Station Spacing

Before starting a new line, select the station spacing that will be used, using this option. Tap the area now showing a new scroll panel will open in the graphic area, scroll to the value to be used and select using the button on the right.

File Name

Use the area to the right of File Name to enter new file names. Tap the input area and use the keyboard to input a new name and tap DONE when done. File names must the format "name" not "name.dat", the program will add the ".dat" suffix.

Join two Lines

After lines have been completed, two lines can be joined to form one line using this option.

Export Type

FDEM-8BT(圖2)-速報App

Use the spinner to select either Surfer or PCFDEM file format.

Plot Values

Amplitude

Select this option before loading a file to display the Amplitude plot.

Phase

Select this option before loading a file to display the Phase plot.

Station Number

The current Station number will be displayed here when busy with a survey.

START

Use this button initiate a reading at a new station.

READ

When the data logger have completed the station's readings two beeps will sound and the BTC LED will come on. Then tap READ to retrieve the data from the logger..

BT

Before starting to take readings communications between the Tablet and the Data logger must be setup. Press BT and choose the device named HC-05 to link to.

GPS

The coordinates of the first and last stations will be incorporated in the data file if GPS use is enabled with this function.

RXbat%=

For each station the battery voltage of the receiver and the transmitter will be retrieved from the data logger, the Receiver battery status is displayed here as a % of full capacity.

TXbat%= Transmitter battery status is displayed here as a % of full capacity

Current GPS coordinates

The bottom left panel is used to display the current GPS data, if available.

General Info

This panel is used to display prompts, warnings and general info.