價格：免費
更新日期：2019-04-14
檔案大小：3.5M
目前版本：2.0.3
版本需求：Android 4.0 以上版本
官方網站：mailto:edodm.project@gmail.com
Email：https://github.com/edodm85/Privacy/blob/master/OV7670_Grabber_FREE_privacy_policy.md
聯絡地址：Italy, Riese pio x, via caste
OV Grabber FREE is a application that acquires and displays images from a OV7670 camera (in my example I used the camera board V2 OV7670 with FIFO AL422).
The communication between the phone and the OV7670 is done through a dedicated hardware (for example mbed LPC1768 board) via a tcp/ip protocol.
The example, informations and the source code for mbed LPC1768 board are available at: https://developer.mbed.org/users/edodm85/notebook/ov7670-camera-and-ethernet-stream/
NOTE: in my example I used a mbed LPC1768 board but you can use any dedicated hardware (ex arduino, rasberry, etc) that have a tcp/ip connection.
Instructions:
1) first you have to connect OV7670 camera board correctly to your dedicated hardware (ex: mbed LPC1768 board)
2) connect the phone and the dedicated hardware to the same local network through a router
3) insert the ip and port of the dedicated hardware in the TCP CONSOLE Settings
4) press the connect button (the black ball changes in green)
5) in the tab "Grabber" first you have to press the "INIT" button and press the "SNAP" button for acquire an image
The advantages of PRO application are:
- no advertising
- YUV422 enabled
- YUV420 enabled
- All resolutions
- save images enabled
- contribute to the maintenance and support the app
Please rate and review so I can make it better!
