速報APP / 生產應用 / RMU2 Config

RMU2 Config

價格:免費

更新日期:2019-04-05

檔案大小:17M

目前版本:1.0.9

版本需求:Android 4.4 以上版本

官方網站:http://www.mobiltex.com/products/rmu2/index.html

Email:sales.rmu2@mobiltex.com

聯絡地址:3640 26th Street NE Calgary, AB. T1Y 4T7 Canada

RMU2 Config(圖1)-速報App

*** Requires a corTalk® RBT1 and RMU2 to use. ***

Contact us at 'sales.rmu2@mobiltex.com' to purchase.

This app is for configuring the corTalk® RMU2 (Remote Monitoring Unit 2) with the new RBT1 Bluetooth interface cable. The cable functions as a complete RMU2 programming interface but only requires the Bluetooth connection of your phone. The RMU2 is used to monitor a cathodic protection rectifier with accurate measurement of a wide variety of signals. This app allows access to diagnostic information on the RMU2 and allows setting up the configuration to meet the customer's needs.

RMU2 Config(圖2)-速報App

The app allows full configuration of the RMU2 including

- slot measurement types

- limits

RMU2 Config(圖3)-速報App

- slot scaling and offset

- location

Other features include the

RMU2 Config(圖4)-速報App

- viewing of readings and their limits

- detailed status screen for troubleshooting

- integrated manual

RMU2 Config(圖5)-速報App

- wiring diagrams for each measurement type

The RBT1 is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be found and changed with the app or reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet. Once paired, the Android device can reconnect without needing to re-enter the code.

RMU2 Config(圖6)-速報App