價格：免費
更新日期：2019-06-12
檔案大小：4.3M
目前版本：1.1.13
版本需求：Android 4.4 以上版本
官方網站：http://www.ascontecnologic.com
Email：store@ascontecnologic.com
聯絡地址：Viale Indipendenza, 56 27029 Vigevano (PV) Italy
ATT NFC
An Ascon Tecnologic APP designed to make the programming of the new ATT1 family signal transmitters easy even in the field.
Thanks to this APP and to the NFC technology it is possible to read the configuration of a transmitter, save, modify and send it to one or more transmitters without using plugs, connectors, cables or other stuff.
The APP automatically recognizes the device and in a few seconds it reads the configuration.
At this point you can edit, save on your phone, send via email or copy to another ATT1 the currently stored configuration.
Among the special features is its ability to give to ATT1 device a name (NAME TAG) to identify it within the installation, set the output value that indicates the burn-out state, define whether the information will be given in ° C or ° F, define the retransmitted range and compensate for errors due to the position of the probe by means of a user calibration procedure or by offset and gain.
The complete user manual of the APP can be downloaded from the website : http://www.ascontecnologic.com/images/PRODOTTI/SensoriTrasmettitori/Temperatura/PDF/ATT1/ISTR-FAT-NFCENG01.pdf
The ATT1 family of transmitters is able to convert into a linearized and standardized output (4-20 mA) the signal coming from:
Thermocouples: B, E, J, K, N, R, S, T.
RTD: Pt100, Pt 1000, Ni 100.
Potentiometers: 0 - 400 Ohm or 0 - 4k Ohm.
Millivolts: -10 - +70 mV
Uncommon among others is the possibility, provided as standard to all users, to create and store custom linearization for non-standard sensors (or not provided from the factory), whether thermocouples, potentiometers or mV.
For convenience and usability reasons, the compilation of the linearization tables and the transfer of custom linearizations is possible only by using the RF programmer AFC1 connected to a PC (Windows) equipped with "AT NFC Soft" software, downloadable from ftp://atftp.ascontecnologic.com/ATT1_PC_Configurator/
MINIMUM SYSTEM REQUIREMENTS
Smartphone equipped with NFC
Operating system: Android 4.4 KitKat or higher.
RELATIONSHIPS WITH CUSTOMERS:
http://www.ascontecnologic.com/en/support/sales-conditions
