速報APP / 汽車與車輛 / Gearhead Offroad

Gearhead Offroad

價格:免費

更新日期:2019-04-12

檔案大小:13M

目前版本:2.1

版本需求:Android 4.0 以上版本

官方網站:http://www.innovateengineering.pro/gearhead

Email:support@innovateengineering.pro

聯絡地址:116 N 3RD ST STE 529 PALMYRA, WI 53156-9347

Gearhead Offroad(圖1)-速報App

If you are a hobby gearhead or professional engine or chassis builder, you’ll want Gearhead Offroad! Gearhead Offroad is the calculator app that us gearheads use for many performance automotive parameters. It calculates or estimates numerous engine, exhaust, gearing, tire, suspension, acceleration, and other vehicle parameters along with tap and drill sizes. Gearhead Pro works in both standard and metric units and even has advanced settings to customize the calculations to your specific scenario so you can select the most compatible parts for your application.

Gearhead Offroad calculates or estimates:

Speed/Gearing

- Engine RPM from vehicle speed, gearing, tire size

- Vehicle Speed from engine RPM, gearing, tire size

- Axle Gear needed for a specific RPM at a certain speed with a given tire size

- Tire Diameter and Cross section width from sidewall size

Gearhead Offroad(圖2)-速報App

- Simple gear ratios based on drive and driven tooth count

Engine

- Displacement from cylinders, bore, and stroke

- Bore/Stroke ratio

- Static Compression Ratio

- Average Piston Speed

- Airflow

Gearhead Offroad(圖3)-速報App

- Connecting Rod Ratio

- Maximum connecting rod angle from cylinder axis

- Compression Height (piston wrist pin height)

- Dynamic Compression Ratio from the point the intake valve closes

- Head gasket volume (from bore and compressed thickness if round)

- Valve opening and closing events from the cam duration, IC, and LSA

- Cam specs from the valve opening and closing events

Gearhead Offroad(圖4)-速報App

- Valve overlap

- Valve lift based on new rocker ratio or lobe lift and rocker ratio

- Valve spring forces from valve spring specs to actual installed height and lift

- Mark dimension on your balancer to set a desired timing advance

Engine Externals

- Minimum air filter size for your engine

- Recommended header primary tube size for your engine

Gearhead Offroad(圖5)-速報App

- Recommended exhaust size for your engine

- Cross-sectional flow area of a pipe, or the pipe size from a desired flow area

Suspension

- Instant center, Roll Center and Axis, and Anti-Squat of a 4-link rear suspension

- Cg height of your vehicle using the raise one end method

- Combined and secondary spring rates of a dual spring coil-over setup

Power

Gearhead Offroad(圖6)-速報App

- Power from Torque and RPM, or vice versa

Fasteners and Threading

- Lookup cutting tap drill size

Fuel System

- Total Fuel system flow for fuel pump selection

- Fuel injector flow for injector selection

- Convert an injector flow rating to a new pressure or flow

Gearhead Offroad(圖7)-速報App

If you are looking for more please check out our "Gearhead Pro" app.

None of our apps have adds or use special permissions.

Gearhead Offroad(圖8)-速報App