價格：免費
更新日期：2019-03-26
檔案大小：1.4M
目前版本：1.2
版本需求：Android 4.0.3 以上版本
官方網站：http://knifeGrinders.com.au
Email：kg@knifegrinders.com.au
聯絡地址：Vadim Kraichuk 12 Quail Place Ingleburn NSW 2565 Australia
The applet sets grinding angle on Tormek T-4, T-7, T-8 and SuperGrind-2000, using knife jigs. For use with knife jigs only.
Time-wise it is quicker than any other method.
For your desired grinding angle, the applet will give you the Universal Support bar height as a vertical distance from the top of the Tormek housing to the top of the bar.
The Universal Support bar height is set with the help of a caliper depth probe with 0.1 mm accuracy; this translates into 0.1 degree accuracy of the target grinding angle.
The applet comes especially handy when you use several progressively finer grinding wheels of different diameter, and as you change to the next wheel you have to adjust height of the Universal Support to maintain the same grinding angle. This software enables to keep exact edge angle as in the process of sharpening the blade is moved from wheel to wheel of different diameter, or between Tormek T7 and T8 etc.
We have been using this software for knife sharpening in our workshop for years, verifying the edge angle with a CATRA laser protractor in the end of grinding for QA, and this software has never failed.
For full info please visit our website http://knifegrinders.com.au/05Equipment_scripts.htm